FLX™ Flexible Render System

is a highly flexible waterproof acrylic plaster membrane, that is applied over substrates to provide a crack resistant coating.

FLX™ is a highly flexible waterproof acrylic plaster membrane, that is applied over substrates to provide resistance against cracking. It’s non-cement based waterborne acrylic plaster system containing aggregate to provide flexibility and has excellent adhesion qualities. FLX™ is Manufactured in NZ for New Zealand conditions, it’s a proven product that has been on the market for over 10 years.

Advantages

The highly flexible properties of FLX™ provide a flexible plaster finish on the exterior surface of the substrate, providing the homeowner, contractor or designer with the security of added protection to their investment.

Limitations

• Do not apply when ambient temperature is below 10°C or surface temperature is above 45°C.
• Apply as supplied – do not thin.

Technical Data

Resin Type: Adhesion Promoted Pure Acrylic polymer Pigmentation: Titanium dioxide and inert extenders Solvents: Water Colour: White and pastel tints. Gloss Level: Low Sheen. Density: 1.34 Kgs/ Litre Dry-Time: 30 mins Touch, 4 hour between overcoat. Coverage: 4-6 m2 per litre. No. of coats: Two Packaging sizes: 4 & 15 litres Flash Point: None Thinner: Water

Surface Preparation

• Remove all unsound paint, surface grease and oil, dirt etc. Treat mould affect areas with Masons Splash and Dash.

Application

• Apply two coats of FLX™ Premium Range Acrylic Finish to dry film thickness of 80 microns per coat.
• For metal or metal reinforced concrete structures us a specified primer.
• Apply one coat of LIMESTOP Plaster Sealer.

For Best Results

1. Ensure correct dry film thickness is achieved.
2. Allow at least 4 hours before overcoating.
3. Do not apply in direct sunlight.

Health & Safety

• FLX™ Premium Range Acrylic Finish is essentially non-flammable and non-hazardous. (Please refer to Material Safety Data Sheet before using)
• KEEP OUT OF REACH OF CHILDREN