Back

Ceiling Velvet

Product Description

Resene Ceiling Velvet dries to a beautiful, even, flat finish ideal for ceilings in dry and wet areas. Based on a tough solventborne resin to give fast drying and durability in all hardwearing areas. This lower odour formulation is easy to apply and dries without the unwanted and strong solvent odours associated with traditional solventborne products.

Typical uses:
• Ceilings especially in wet areas, such as bathrooms, kitchens and laundries.

Performance:
1. Excellent for wet areas where a durable and attractive finish is required as it does not exhibit surfactant leaching.
2. Excellent flow for a smooth, even flat finish.
3. Easy to clean or wash surface.
4. Lower odour formulation than traditional enamels, less than 1% aromatic hydrocarbon content.
5. May be applied over a wide range of temperatures.

Limitations:
1. Not for exterior use.
2. Ensure the correct primer or sealer is used.
3. Not for use as first coat on fibre or particle board, use Resene Quick Dry (see Data Sheet D45) on particle board. On fibre cement board use Resene Sureseal (see Data Sheet D42).
4. Not for use as the first coat on hardboard, use Resene Sureseal.
5. Not suitable for direct application to cementitious surfaces, use Resene Sureseal (see Data Sheet D42).
6. Drying may be affected by low temperatures and high humidity.
7. May yellow in dark areas.

Please ensure the current Data Sheet and Safety Data Sheet are consulted prior to specification or application of product. If in doubt contact Resene.

Enjoy the Resene Promise of Quality Guarantee on Resene decorative coatings - see Resene for more information.

Resene decorative coatings are tinted using unique Resene non VOC tinters enabling you to achieve the desired colour without added VOCs.

Engineered Systems Coatings products are tinted using special Resene industrial tinters. Remember Resene can create a customised specification free for your project - contact us for more information. Order colour charts and drawdowns of Resene colours from the Resene website.